IIgrRadialGaugeProps

Gets whether and how to display the highlighted value.

Gets the actual opacity of the primary needle while highlighting

Gets the resolved maximum value of the scale.

Gets the resolved minimum value of the scale.

Gets the actual pixel scaling ratio used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

Event which is raised when a highlight label of the gauge is aligned and styled. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

Event which is raised when a label of the gauge is aligned along the scale. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label. Use ui.width to obtain the width of the label. Use ui.height to obtain the height of the label. Use ui.offsetX to obtain the X offset of the label on the gauge scale. Use ui.offsetY to obtain the Y offset of the label on the gauge scale.

Event which is raised when a subtitle of the gauge is aligned and styled. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

Event which is raised when a title of the gauge is aligned and styled. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

Gets or sets the brush to use to fill the backing of the gauge.

Gets or sets the corner rounding radius to use for the fitted scale backings.

Gets or sets the inner extent of the gauge backing.

Gets or sets the outer extent of the gauge backing.

Gets or sets the brush to use for the outline of the backing.

Gets or sets the over sweep angle to apply to the backing if it is displaying fitted (in degrees). Must be greater or equal to 0.

Gets or sets the type of shape to use for the backing of the gauge.

Gets or sets the stroke thickness of the backing outline.

Gets or sets the x position of the center of the gauge with the value ranging from 0 to 1.

Gets or sets the y position of the center of the gauge with the value ranging from 0 to 1.

Gets or sets the strategy to use for omitting labels if the first and last label have the same value.

Gets or sets the font.

Gets or sets the brush to use for the label font.

Event which is raised when a highlight label of the gauge is formatted. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the title will be located. Use ui.value to obtain the value on the gauge scale associated with the title. Use ui.label to obtain the string value of the title.

Event which is raised when a label of the gauge is formatted. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

Event which is raised when a subtitle of the gauge is formatted. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the subtitle will be located. Use ui.value to obtain the value on the gauge scale associated with the subtitle. Use ui.label to obtain the string value of the subtitle.

Event which is raised when a title of the gauge is formatted. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the title will be located. Use ui.value to obtain the value on the gauge scale associated with the title. Use ui.label to obtain the string value of the title.

Gets or sets the angle for the highlight label in degrees.

Gets or sets the brush to use for rendering highlight text

Gets or sets the highlight label shows values of the gauge.

Gets or sets the angle for the highlight label in degrees.

Gets or sets the format used when creating highlight label.

Gets or sets the format specifiers to use with the HighlightLabelFormat string.

Gets or sets whether or not the highlight label should snap angle position to needle pivot (opposite of needle pointer).

Gets or sets the text displayed for the highlight label of the gauge.

Gets or Sets the style to use for the units text.

Gets or sets the highlight value at which to point the secondary needle of the gauge.

Occurs when the Hightlight Value property changes.

Gets or sets whether and how to display the highlighted value.

Gets or sets the opacity of the primary needle while highlighting

Gets or sets the interval to use for the scale.

Gets or sets whether the needle is constrained within the minimum and maximum value range during dragging.

Gets or sets whether needle dragging is enabled or not.

Gets or sets whether the needle is constrained within the minimum and maximum value range during dragging.

Gets or sets whether needle dragging is enabled or not.

Gets or sets the position at which to put the labels as a value from 0 to 1, measured form the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the label composite format used when creating label values.

Gets or sets the format specifiers to use with the LabelFormat string.

Gets or sets the interval to use for rendering labels. This defaults to be the same interval as the tickmarks on the scale.

Gets or sets the maximum value of the scale.

Gets or sets the minimum value of the scale.

Gets or sets the brush to use for the minor tickmarks.

Gets or sets the number of minor tickmarks to place between major tickmarks.

Gets or sets the position at which to stop rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the position at which to start rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the stroke thickness to use when rendering minor ticks.

Gets or sets the extent of the feature which is closest to the base (e.g. a bulb) with a value from -1 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the width of the needle at its feature which is closest to the base (e.g. a bulb) with a value from 0 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the brush to use when rendering the fill of the needle.

Gets or sets the extent (from -1 to 1) at which to end rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the brush to use when rendering the outline of the needle.

Gets or sets the brush to use for filling the needle cap. Note: this only applies to certain cap shapes.

Gets or sets the width of the inner cutout section of the needle cap with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle that has a cutout section.

Gets or sets the brush to use for the outlines of the needle cap.

Gets or sets the shape to use for the needle cap.

Gets or sets the stroke thickness to use for the outline of the needle cap.

Gets or sets the width of the cap of the needle with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the extent of the feature which is closest to the point (e.g. the tapering point of a needle) with a value from -1 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the width of the needle at its feature which is closest to the point (e.g. the tapering point of a needle) with a value from 0 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the shape to use when rendering the needle from a number of options.

Gets or sets the extent (from -1 to 1) at which to start rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the stroke thickness of the needle outline.

Gets or sets the title uses optical scaling when the gauge is resized.

Gets the optical scaling ratio calculated by dividing minimum gauge size by value of OpticalScalingSize property.

Gets or sets the size at which labels have 100% optical scaling, e.g. labels will have larger fonts when gauge's size is larger

• labels will have 200% larger fonts when gauge's size is 1000 and this property is set to 500
• labels will have 50% smaller fonts when gauge's size is 250 and this property is set to 500

Gets or sets the scaling value used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

Gets or sets the multiplying factor to apply to the normal radius of the gauge. The radius of the gauge is defined by the minimum of the width and height of the control divided by 2.0. This introduces a multiplicative factor to that value.

Gets or sets a collection of brushes to be used as the palette for gauge ranges.

Gets or sets a collection of brushes to be used as the palette for gauge outlines.

Gets or sets the brush to use to fill the background of the scale.

Gets or sets the end angle for the scale in degrees.

Gets or sets the position at which to stop rendering the scale as a value from 0 to 1 measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the extra degrees of sweep to apply to the scale background. Must be greater or equal to 0.

Gets or sets the oversweep shape to use for the excess fill area for the scale.

Gets or sets the start angle for the scale in degrees.

Gets or sets the position at which to start rendering the scale, measured from the center of the gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the direction in which the scale sweeps around the center from the start angle to end angle.

Gets or sets the angle for the inner label in degrees.

Gets or sets the brush to use for rendering inner unit text

Gets or sets the subtitle show values of the gauge.

Gets or sets the angle for the inner label in degrees.

Gets or sets the subtitle format used when creating subtitle label.

Gets or sets the format specifiers to use with the SubtitleFormat string.

Gets or sets whether or not the subtitle should snap angle position to needle pivot (opposite of needle pointer).

Gets or sets the text displayed in the subtitle of the gauge.

Gets or Sets the style to use for the units text.

Gets or sets the brush to use for the major tickmarks.

Gets or sets the position at which to stop rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the position at which to start rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

Gets or sets the stroke thickness to use when rendering ticks.

Gets or sets the angle for the inner label in degrees.

Gets or sets the brush to use for rendering inner unit text

Gets or sets the title show values of the gauge.

Gets or sets the angle for the inner label in degrees.

Gets or sets the title format used when creating title label.

Gets or sets the format specifiers to use with the TitleFormat string.

Gets or sets whether or not the title should snap angle position to needle pivot (opposite of needle pointer).

Gets or sets the text displayed in the title of the gauge.

Gets or Sets the style to use for the units text.

Gets or sets the number of milliseconds over which changes to the gauge should be animated.

Gets the transition progress of the animation when the control is animating.

Gets or sets the value at which to point the needle of the gauge.

Occurs when the Value property changes.