IgxLinearGaugeComponent

A linear gauge for displaying a single value on a defined scale.

Constructors

new IgxLinearGaugeComponent(_renderer: Renderer2, _elRef: ViewContainerRef, _ngZone: NgZone, _injector: Injector): IgxLinearGaugeComponent

Returns IgxLinearGaugeComponent

Properties

_dynamicContent

_dynamicContent: ViewContainerRef

actualRanges

The ranges actually present in the chart. Do not directly modify this array. This array's contents can be modified by causing Angular to reproject the child content. Or adding and removing ranges from the manual ranges collection on the ranges property.

actualRanges: IgxLinearGraphRangeComponent[]

contentRanges

contentRanges: QueryList<IgxLinearGraphRangeComponent>

ngAcceptInputType_actualHighlightValueDisplayMode

ngAcceptInputType_actualHighlightValueDisplayMode: any

ngAcceptInputType_actualHighlightValueOpacity

ngAcceptInputType_actualHighlightValueOpacity: string | number

ngAcceptInputType_actualMaximumValue

ngAcceptInputType_actualMaximumValue: string | number

ngAcceptInputType_actualMinimumValue

ngAcceptInputType_actualMinimumValue: string | number

ngAcceptInputType_actualPixelScalingRatio

ngAcceptInputType_actualPixelScalingRatio: string | number

ngAcceptInputType_animating

ngAcceptInputType_animating: string | boolean

ngAcceptInputType_backingInnerExtent

ngAcceptInputType_backingInnerExtent: string | number

ngAcceptInputType_backingOuterExtent

ngAcceptInputType_backingOuterExtent: string | number

ngAcceptInputType_backingStrokeThickness

ngAcceptInputType_backingStrokeThickness: string | number

ngAcceptInputType_highlightValue

ngAcceptInputType_highlightValue: string | number

ngAcceptInputType_highlightValueDisplayMode

ngAcceptInputType_highlightValueDisplayMode: any

ngAcceptInputType_highlightValueOpacity

ngAcceptInputType_highlightValueOpacity: string | number

ngAcceptInputType_interval

ngAcceptInputType_interval: string | number

ngAcceptInputType_isHighlightNeedleDraggingEnabled

ngAcceptInputType_isHighlightNeedleDraggingEnabled: string | boolean

ngAcceptInputType_isNeedleDraggingEnabled

ngAcceptInputType_isNeedleDraggingEnabled: string | boolean

ngAcceptInputType_isScaleInverted

ngAcceptInputType_isScaleInverted: string | boolean

ngAcceptInputType_labelExtent

ngAcceptInputType_labelExtent: string | number

ngAcceptInputType_labelFormatSpecifiers

ngAcceptInputType_labelFormatSpecifiers: string | any[]

ngAcceptInputType_labelInterval

ngAcceptInputType_labelInterval: string | number

ngAcceptInputType_labelsPostInitial

ngAcceptInputType_labelsPostInitial: string | number

ngAcceptInputType_labelsPreTerminal

ngAcceptInputType_labelsPreTerminal: string | number

ngAcceptInputType_labelsVisible

ngAcceptInputType_labelsVisible: string | boolean

ngAcceptInputType_maximumValue

ngAcceptInputType_maximumValue: string | number

ngAcceptInputType_mergeViewports

ngAcceptInputType_mergeViewports: string | boolean

ngAcceptInputType_minimumValue

ngAcceptInputType_minimumValue: string | number

ngAcceptInputType_minorTickCount

ngAcceptInputType_minorTickCount: string | number

ngAcceptInputType_minorTickEndExtent

ngAcceptInputType_minorTickEndExtent: string | number

ngAcceptInputType_minorTickStartExtent

ngAcceptInputType_minorTickStartExtent: string | number

ngAcceptInputType_minorTickStrokeThickness

ngAcceptInputType_minorTickStrokeThickness: string | number

ngAcceptInputType_needleBreadth

ngAcceptInputType_needleBreadth: string | number

ngAcceptInputType_needleInnerBaseWidth

ngAcceptInputType_needleInnerBaseWidth: string | number

ngAcceptInputType_needleInnerExtent

ngAcceptInputType_needleInnerExtent: string | number

ngAcceptInputType_needleInnerPointExtent

ngAcceptInputType_needleInnerPointExtent: string | number

ngAcceptInputType_needleInnerPointWidth

ngAcceptInputType_needleInnerPointWidth: string | number

ngAcceptInputType_needleOuterBaseWidth

ngAcceptInputType_needleOuterBaseWidth: string | number

ngAcceptInputType_needleOuterExtent

ngAcceptInputType_needleOuterExtent: string | number

ngAcceptInputType_needleOuterPointExtent

ngAcceptInputType_needleOuterPointExtent: string | number

ngAcceptInputType_needleOuterPointWidth

ngAcceptInputType_needleOuterPointWidth: string | number

ngAcceptInputType_needleShape

ngAcceptInputType_needleShape: string | LinearGraphNeedleShape

ngAcceptInputType_needleStrokeThickness

ngAcceptInputType_needleStrokeThickness: string | number

ngAcceptInputType_orientation

ngAcceptInputType_orientation: string | LinearScaleOrientation

ngAcceptInputType_pixelScalingRatio

ngAcceptInputType_pixelScalingRatio: string | number

ngAcceptInputType_rangeBrushes

ngAcceptInputType_rangeBrushes: string | string[]

ngAcceptInputType_rangeInnerExtent

ngAcceptInputType_rangeInnerExtent: string | number

ngAcceptInputType_rangeOuterExtent

ngAcceptInputType_rangeOuterExtent: string | number

ngAcceptInputType_rangeOutlines

ngAcceptInputType_rangeOutlines: string | string[]

ngAcceptInputType_scaleEndExtent

ngAcceptInputType_scaleEndExtent: string | number

ngAcceptInputType_scaleInnerExtent

ngAcceptInputType_scaleInnerExtent: string | number

ngAcceptInputType_scaleOuterExtent

ngAcceptInputType_scaleOuterExtent: string | number

ngAcceptInputType_scaleStartExtent

ngAcceptInputType_scaleStartExtent: string | number

ngAcceptInputType_scaleStrokeThickness

ngAcceptInputType_scaleStrokeThickness: string | number

ngAcceptInputType_showToolTip

ngAcceptInputType_showToolTip: string | boolean

ngAcceptInputType_showToolTipTimeout

ngAcceptInputType_showToolTipTimeout: string | number

ngAcceptInputType_tickEndExtent

ngAcceptInputType_tickEndExtent: string | number

ngAcceptInputType_ticksPostInitial

ngAcceptInputType_ticksPostInitial: string | number

ngAcceptInputType_ticksPreTerminal

ngAcceptInputType_ticksPreTerminal: string | number

ngAcceptInputType_tickStartExtent

ngAcceptInputType_tickStartExtent: string | number

ngAcceptInputType_tickStrokeThickness

ngAcceptInputType_tickStrokeThickness: string | number

ngAcceptInputType_transitionDuration

ngAcceptInputType_transitionDuration: string | number

ngAcceptInputType_transitionProgress

ngAcceptInputType_transitionProgress: string | number

ngAcceptInputType_value

ngAcceptInputType_value: string | number

ɵcmp

ɵcmp: ɵɵComponentDeclaration<IgxLinearGaugeComponent, "igx-linear-gauge", never, object, object, ["contentRanges"], never, true, never>

ɵfac

ɵfac: ɵɵFactoryDeclaration<IgxLinearGaugeComponent, never>

Accessors

actualHighlightValueDisplayMode

Gets whether and how to display the highlighted value.

get actualHighlightValueDisplayMode(): HighlightedValueDisplayMode

Returns HighlightedValueDisplayMode

set actualHighlightValueDisplayMode(v: HighlightedValueDisplayMode): void

Parameters

v: HighlightedValueDisplayMode

Returns void

actualHighlightValueOpacity

Gets the actual opacity of the primary needle while highlighting

get actualHighlightValueOpacity(): number

Returns number

set actualHighlightValueOpacity(v: number): void

Parameters

v: number

Returns void

actualMaximumValue

Gets the resolved maximum value of the scale.

get actualMaximumValue(): number

Returns number

set actualMaximumValue(v: number): void

Parameters

v: number

Returns void

actualMaximumValueChange

get actualMaximumValueChange(): EventEmitter<number>

Returns EventEmitter<number>

actualMinimumValue

Gets the resolved minimum value of the scale.

get actualMinimumValue(): number

Returns number

set actualMinimumValue(v: number): void

Parameters

v: number

Returns void

actualMinimumValueChange

get actualMinimumValueChange(): EventEmitter<number>

Returns EventEmitter<number>

actualPixelScalingRatio

Gets the actual pixel scaling ratio used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

get actualPixelScalingRatio(): number

Returns number

set actualPixelScalingRatio(v: number): void

Parameters

v: number

Returns void

alignLabel

Event which is raised when a label of the linear gauge is aligned along the scale. Function takes first argument evt and second argument ui. Use ui.owner to obtain reference to the gauge widget. Use ui.actualMinimumValue to obtain the minimum value of the gauge scale. Use ui.actualMaximumValue to obtain the maximum value of the gauge scale. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label. Use ui.width to obtain the width of the label. Use ui.height to obtain the height of the label. Use ui.offsetX to obtain the X offset of the label on the gauge scale. Use ui.offsetY to obtain the Y offset of the label on the gauge scale.

get alignLabel(): EventEmitter<object>

Returns EventEmitter<object>

animating

Gets a value indicating whether the bullet graph is currently animating.

get animating(): boolean

Returns boolean

backingBrush

Gets or sets the brush to use to fill the backing of the linear gauge.

get backingBrush(): string

Returns string

set backingBrush(v: string): void

Parameters

v: string

Returns void

backingInnerExtent

Gets or sets the inner extent of the linear gauge backing.

get backingInnerExtent(): number

Returns number

set backingInnerExtent(v: number): void

Parameters

v: number

Returns void

backingOuterExtent

Gets or sets the outer extent of the linear gauge backing.

get backingOuterExtent(): number

Returns number

set backingOuterExtent(v: number): void

Parameters

v: number

Returns void

backingOutline

Gets or sets the brush to use for the outline of the backing.

get backingOutline(): string

Returns string

set backingOutline(v: string): void

Parameters

v: string

Returns void

backingStrokeThickness

Gets or sets the stroke thickness of the backing outline.

get backingStrokeThickness(): number

Returns number

set backingStrokeThickness(v: number): void

Parameters

v: number

Returns void

font

Gets or sets the font.

get font(): string

Returns string

set font(v: string): void

Parameters

v: string

Returns void

fontBrush

Gets or sets the brush to use for the label font.

get fontBrush(): string

Returns string

set fontBrush(v: string): void

Parameters

v: string

Returns void

formatLabel

Event which is raised when a label of the the gauge is formatted. Function takes first argument evt and second argument ui. Use ui.owner to obtain reference to the gauge widget. Use ui.actualMinimumValue to obtain the minimum value of the gauge scale. Use ui.actualMaximumValue to obtain the maximum value of the gauge scale. Use ui.value to obtain the value on the the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

get formatLabel(): EventEmitter<object>

Returns EventEmitter<object>

height

get height(): string

Returns string

set height(value: string): void

Parameters

value: string

Returns void

highlightValue

Gets or sets the highlight value at which to point the secondary needle of the gauge.

get highlightValue(): number

Returns number

set highlightValue(v: number): void

Parameters

v: number

Returns void

highlightValueChanged

Occurs when the Hightlight Value property changes.

get highlightValueChanged(): EventEmitter<object>

Returns EventEmitter<object>

highlightValueDisplayMode

Gets or sets whether and how to display the highlighted value.

get highlightValueDisplayMode(): HighlightedValueDisplayMode

Returns HighlightedValueDisplayMode

set highlightValueDisplayMode(v: HighlightedValueDisplayMode): void

Parameters

v: HighlightedValueDisplayMode

Returns void

highlightValueOpacity

Gets or sets the opacity of the primary needle while highlighting

get highlightValueOpacity(): number

Returns number

set highlightValueOpacity(v: number): void

Parameters

v: number

Returns void

interval

Gets or sets the interval to use for the scale.

get interval(): number

Returns number

set interval(v: number): void

Parameters

v: number

Returns void

isHighlightNeedleDraggingEnabled

Gets or sets whether highlight needle dragging is enabled or not.

get isHighlightNeedleDraggingEnabled(): boolean

Returns boolean

set isHighlightNeedleDraggingEnabled(v: boolean): void

Parameters

v: boolean

Returns void

isNeedleDraggingEnabled

Gets or sets whether needle dragging is enabled or not.

get isNeedleDraggingEnabled(): boolean

Returns boolean

set isNeedleDraggingEnabled(v: boolean): void

Parameters

v: boolean

Returns void

isScaleInverted

Gets or sets a value indicating whether the scale is inverted. When the scale is inverted the direction in which the scale values increase is right to left.

get isScaleInverted(): boolean

Returns boolean

set isScaleInverted(v: boolean): void

Parameters

v: boolean

Returns void

labelExtent

Gets or sets the position at which to put the labels as a value from 0 to 1, measured from the bottom of the scale. Values further from zero than 1 can be used to hide the labels of the linear gauge.

get labelExtent(): number

Returns number

set labelExtent(v: number): void

Parameters

v: number

Returns void

labelFormat

Gets or sets the label composite format used when creating label values.

get labelFormat(): string

Returns string

set labelFormat(v: string): void

Parameters

v: string

Returns void

labelFormatSpecifiers

Gets or sets the format specifiers to use with the LabelFormat string.

get labelFormatSpecifiers(): any[]

Returns any[]

set labelFormatSpecifiers(v: any[]): void

Parameters

v: any[]

Returns void

labelInterval

Gets or sets the interval to use for rendering labels. This defaults to be the same interval as the tickmarks on the scale.

get labelInterval(): number

Returns number

set labelInterval(v: number): void

Parameters

v: number

Returns void

labelsPostInitial

A value to start adding labels, added to the scale's MinimumValue.

get labelsPostInitial(): number

Returns number

set labelsPostInitial(v: number): void

Parameters

v: number

Returns void

labelsPreTerminal

A value to stop adding labels, subtracted from the scale's MaximumValue.

get labelsPreTerminal(): number

Returns number

set labelsPreTerminal(v: number): void

Parameters

v: number

Returns void

labelsVisible

Gets or sets whether the labels are visible in the gauge.

get labelsVisible(): boolean

Returns boolean

set labelsVisible(v: boolean): void

Parameters

v: boolean

Returns void

maximumValue

Gets or sets the maximum value of the scale.

get maximumValue(): number

Returns number

set maximumValue(v: number): void

Parameters

v: number

Returns void

mergeViewports

Gets or sets whether the scale viewport will be merged with backing viewport.

get mergeViewports(): boolean

Returns boolean

set mergeViewports(v: boolean): void

Parameters

v: boolean

Returns void

minimumValue

Gets or sets the minimum value of the scale.

get minimumValue(): number

Returns number

set minimumValue(v: number): void

Parameters

v: number

Returns void

minorTickBrush

Gets or sets the brush to use for the minor tickmarks.

get minorTickBrush(): string

Returns string

set minorTickBrush(v: string): void

Parameters

v: string

Returns void

minorTickCount

Gets or sets the number of minor tickmarks to place between major tickmarks.

get minorTickCount(): number

Returns number

set minorTickCount(v: number): void

Parameters

v: number

Returns void

minorTickEndExtent

Gets or sets the position at which to stop rendering the minor tickmarks as a value from 0 to 1, measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get minorTickEndExtent(): number

Returns number

set minorTickEndExtent(v: number): void

Parameters

v: number

Returns void

minorTickStartExtent

Gets or sets the position at which to start rendering the minor tickmarks as a value from 0 to 1, measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get minorTickStartExtent(): number

Returns number

set minorTickStartExtent(v: number): void

Parameters

v: number

Returns void

minorTickStrokeThickness

Gets or sets the stroke thickness to use when rendering minor ticks.

get minorTickStrokeThickness(): number

Returns number

set minorTickStrokeThickness(v: number): void

Parameters

v: number

Returns void

needleBreadth

Gets or sets the needle breadth.

get needleBreadth(): number

Returns number

set needleBreadth(v: number): void

Parameters

v: number

Returns void

needleBrush

Gets or sets the brush to use for needle element.

get needleBrush(): string

Returns string

set needleBrush(v: string): void

Parameters

v: string

Returns void

needleInnerBaseWidth

Gets or sets the width of the needle's inner base.

get needleInnerBaseWidth(): number

Returns number

set needleInnerBaseWidth(v: number): void

Parameters

v: number

Returns void

needleInnerExtent

Gets or sets the position at which to start rendering the needle geometry, measured from the front/bottom of the linear gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get needleInnerExtent(): number

Returns number

set needleInnerExtent(v: number): void

Parameters

v: number

Returns void

needleInnerPointExtent

Gets or sets the extent of the needle's inner point.

get needleInnerPointExtent(): number

Returns number

set needleInnerPointExtent(v: number): void

Parameters

v: number

Returns void

needleInnerPointWidth

Gets or sets the width of the needle's inner point.

get needleInnerPointWidth(): number

Returns number

set needleInnerPointWidth(v: number): void

Parameters

v: number

Returns void

needleName

Gets or sets the name used for needle.

get needleName(): string

Returns string

set needleName(v: string): void

Parameters

v: string

Returns void

needleOuterBaseWidth

Gets or sets the width of the needle's outer base.

get needleOuterBaseWidth(): number

Returns number

set needleOuterBaseWidth(v: number): void

Parameters

v: number

Returns void

needleOuterExtent

Gets or sets the position at which to stop rendering the needle geometry as a value from 0 to 1 measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get needleOuterExtent(): number

Returns number

set needleOuterExtent(v: number): void

Parameters

v: number

Returns void

needleOuterPointExtent

Gets or sets the extent of the needle's outer point.

get needleOuterPointExtent(): number

Returns number

set needleOuterPointExtent(v: number): void

Parameters

v: number

Returns void

needleOuterPointWidth

Gets or sets the width of the needle's outer point.

get needleOuterPointWidth(): number

Returns number

set needleOuterPointWidth(v: number): void

Parameters

v: number

Returns void

needleOutline

Gets or sets the brush to use for the outline of needle element.

get needleOutline(): string

Returns string

set needleOutline(v: string): void

Parameters

v: string

Returns void

needleShape

Gets or sets the shape to use when rendering the needle from a number of options.

get needleShape(): LinearGraphNeedleShape

Returns LinearGraphNeedleShape

set needleShape(v: LinearGraphNeedleShape): void

Parameters

v: LinearGraphNeedleShape

Returns void

needleStrokeThickness

Gets or sets the stroke thickness to use when rendering single actual value element.

get needleStrokeThickness(): number

Returns number

set needleStrokeThickness(v: number): void

Parameters

v: number

Returns void

orientation

Gets or sets the orientation of the scale.

get orientation(): LinearScaleOrientation

Returns LinearScaleOrientation

set orientation(v: LinearScaleOrientation): void

Parameters

v: LinearScaleOrientation

Returns void

pixelScalingRatio

Gets or sets the scaling value used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

get pixelScalingRatio(): number

Returns number

set pixelScalingRatio(v: number): void

Parameters

v: number

Returns void

rangeBrushes

Gets or sets a collection of brushes to be used as the palette for linear gauge ranges.

get rangeBrushes(): string[]

Returns string[]

set rangeBrushes(v: string[]): void

Parameters

v: string[]

Returns void

rangeInnerExtent

Gets or sets the position at which to start rendering the ranges, measured from the front/bottom of the control as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get rangeInnerExtent(): number

Returns number

set rangeInnerExtent(v: number): void

Parameters

v: number

Returns void

rangeOuterExtent

Gets or sets the position at which to stop rendering the range as a value from 0 to 1 measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get rangeOuterExtent(): number

Returns number

set rangeOuterExtent(v: number): void

Parameters

v: number

Returns void

rangeOutlines

Gets or sets a collection of brushes to be used as the palette for linear gauge outlines.

get rangeOutlines(): string[]

Returns string[]

set rangeOutlines(v: string[]): void

Parameters

v: string[]

Returns void

ranges

A collection or manually added axes for the chart.

get ranges(): IgxLinearGraphRangeCollection

Returns IgxLinearGraphRangeCollection

scaleBrush

Gets or sets the brush to use to fill the scale of the linear gauge.

get scaleBrush(): string

Returns string

set scaleBrush(v: string): void

Parameters

v: string

Returns void

scaleEndExtent

Gets or sets the position at which to stop rendering the scale as a value from 0 to 1, measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get scaleEndExtent(): number

Returns number

set scaleEndExtent(v: number): void

Parameters

v: number

Returns void

scaleInnerExtent

Gets or sets the position at which to start rendering the scale, measured from the bottom/front (when orientation is horizontal/vertical) of the control as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get scaleInnerExtent(): number

Returns number

set scaleInnerExtent(v: number): void

Parameters

v: number

Returns void

scaleOuterExtent

Gets or sets the position at which to stop rendering the scale as a value from 0 to 1 measured from the bottom/front (when orientation is horizontal/vertical) of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get scaleOuterExtent(): number

Returns number

set scaleOuterExtent(v: number): void

Parameters

v: number

Returns void

scaleOutline

Gets or sets the brush to use for the outline of the scale.

get scaleOutline(): string

Returns string

set scaleOutline(v: string): void

Parameters

v: string

Returns void

scaleStartExtent

Gets or sets the position at which to start rendering the scale, measured from the front/bottom of the linear gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get scaleStartExtent(): number

Returns number

set scaleStartExtent(v: number): void

Parameters

v: number

Returns void

scaleStrokeThickness

Gets or sets the stroke thickness of the scale outline.

get scaleStrokeThickness(): number

Returns number

set scaleStrokeThickness(v: number): void

Parameters

v: number

Returns void

showToolTip

Gets or sets a value indicating whether tooltips are enabled.

get showToolTip(): boolean

Returns boolean

set showToolTip(v: boolean): void

Parameters

v: boolean

Returns void

showToolTipTimeout

Gets or sets the time in milliseconds that tooltip appearance is delayed with.

get showToolTipTimeout(): number

Returns number

set showToolTipTimeout(v: number): void

Parameters

v: number

Returns void

tickBrush

Gets or sets the brush to use for the major tickmarks.

get tickBrush(): string

Returns string

set tickBrush(v: string): void

Parameters

v: string

Returns void

tickEndExtent

Gets or sets the position at which to stop rendering the major tickmarks as a value from 0 to 1, measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get tickEndExtent(): number

Returns number

set tickEndExtent(v: number): void

Parameters

v: number

Returns void

ticksPostInitial

A value to start adding tickmarks, added to the scale's MinimumValue.

get ticksPostInitial(): number

Returns number

set ticksPostInitial(v: number): void

Parameters

v: number

Returns void

ticksPreTerminal

A value to stop adding tickmarks, subtracted from the scale's MaximumValue.

get ticksPreTerminal(): number

Returns number

set ticksPreTerminal(v: number): void

Parameters

v: number

Returns void

tickStartExtent

Gets or sets the position at which to start rendering the major tickmarks as a value from 0 to 1, measured from the front/bottom of the linear gauge. Values further from zero than 1 can be used to make this extend further than the normal size of the linear gauge.

get tickStartExtent(): number

Returns number

set tickStartExtent(v: number): void

Parameters

v: number

Returns void

tickStrokeThickness

Gets or sets the stroke thickness to use when rendering ticks.

get tickStrokeThickness(): number

Returns number

set tickStrokeThickness(v: number): void

Parameters

v: number

Returns void

tooltipTemplate

get tooltipTemplate(): TemplateRef<any>

Returns TemplateRef<any>

set tooltipTemplate(value: TemplateRef<any>): void

Parameters

value: TemplateRef<any>

Returns void

transitionDuration

Gets or sets the number of milliseconds over which changes to the linear gauge should be animated.

get transitionDuration(): number

Returns number

set transitionDuration(v: number): void

Parameters

v: number

Returns void

transitionProgress

Gets the transition progress of the animation when the control is animating.

get transitionProgress(): number

Returns number

set transitionProgress(v: number): void

Parameters

v: number

Returns void

value

Gets or sets the value at which the needle is positioned.

get value(): number

Returns number

set value(v: number): void

Parameters

v: number

Returns void

valueChanged

Occurs when the Value property changes.

get valueChanged(): EventEmitter<object>

Returns EventEmitter<object>

width

get width(): string

Returns string

set width(value: string): void

Parameters

value: string

Returns void

Methods

containerResized

containerResized(): void

Returns void

exportSerializedVisualData

Returns visuals as a serialized string.

exportSerializedVisualData(): string

Returns string

findByName

findByName(name: string): any

Parameters

name: string

Returns any

flush

Use to force the linear gauge to finish any deferred work before printing or evaluating its visual. This should only be called if the visual of the linear gauge needs to be synchronously saved or evaluated. Calling this method too often will hinder the performance of the linear gauge.

flush(): void

Returns void

getValueForPoint

Gets the value for the main scale of the gauge for a given point within the bounds of the gauge.

getValueForPoint(point: IgPoint): number

Parameters

point: IgPoint
- The point for which to retrieve the associated value.

Returns number

highlightNeedleContainsPoint

highlightNeedleContainsPoint(point: IgPoint, isFinger: boolean): boolean

Parameters

point: IgPoint
isFinger: boolean

Returns boolean

needleContainsPoint

needleContainsPoint(point: IgPoint, isFinger: boolean): boolean

Parameters

point: IgPoint
isFinger: boolean

Returns boolean

ngAfterContentInit

ngAfterContentInit(): void

Returns void

ngAfterViewInit

ngAfterViewInit(): void

Returns void

ngOnDestroy

ngOnDestroy(): void

Returns void

provideContainer

Called by the UI framework to provide a UI container for rendering this control.

provideContainer(container: any): void

Parameters

container: any
- The UI container element.

Returns void

styleUpdated

styleUpdated(): void

Returns void

updateStyle

updateStyle(): void

Returns void

_createFromInternal

_createFromInternal(internal: any): IgxLinearGaugeComponent

Parameters

internal: any