This topic demonstrates how you can use a xamFormulaEditor™ and a FormulaEditorDialog™ controls in your application and provides code examples.
This document contains the following sections:
Configuring the xamCalculationManager
Configuring the xamFormulaEditor
Configuring the FormulaEditorDialog
Code Examples
You need to first read the following topics:
The table below lists some of the configurations needed to use the xamFormulaEditor and the FormulaEditorDialog controls.
In order to be able to take advantage of the features exposed by the xamFormulaEditor and FormulaEditorDialog controls you first need to add a xamCalculationManager control to your application as shown in Listing 1. For more information on how to use the xamCalculationManager control, refer to the Using xamCalculationManager section.
Configuring the xamFormulaEditor
Adding a xamFormulaEditor to your application.
In order to do this you first need to add references to the following assemblies:
InfragisticsWPF.dll
InfragisticsWPF.Controls.Interactions.XamFormulaEditor.dll
InfragisticsWPF.Controls.Interactions.XamDialogWindow.dll
InfragisticsWPF.Controls.Menus.XamDataTree.dll
The last two are required by the FormulaEditorDialog control. Next, you need to add the necessary using/Imports directives in your code-behind or the Infragistics xml namespace for XAML as shown in Listing 1 and to add the xamFormulaEditor itself.
Configuring the xamFormulaEditor
To make the xamFormulaEditor control fully functional, you need to set its Target property. The target of a xamFormulaEditor control can be any other control on the same page that is registered in a xamCalculationManager control and that has an appropriate property whose value can be a formula string. For more information about how to use the xamCalculationManager with UI controls, refer to the Getting Started with xamCalculationManager topic.
If the target control has a ControlCalculationSettings object set for the XamCalculationManager.ControlSettings attached property and if the Formula property of the ControlCalculationSettings object is set to a formula string, this formula is automatically loaded in the xamFormulaEditor. If this is not the case you can set the Formula property directly to the xamFormulaEditor. In Listing 2 is an example of how to configure the xamFormulaEditor control.
Note: If you set the Formula property, but not the Target, the xamFormulaEditor will not be active.
Adding a FormulaEditorDialog to your application.
The required assembly references for the FormulaEditorDialog are the same as the ones for the xamFormulaEditor and namely:
InfragisticsWPF.dll
InfragisticsWPF.Controls.Interactions.XamFormulaEditor.dll
InfragisticsWPF.Controls.Interactions.XamDialogWindow.dll
InfragisticsWPF.Controls.Menus.XamDataTree.dll
To see how a FormulaEditorDialog is added to an application, refer to Listing 3.
Configuring the FormulaEditorDialog
Since the FormulaEditorDialog and xamFormulaEditor controls both inherit from the FomulaEditorBase class they share most of their functionality. Therefore the configuration process for the FormulaEditorDialog is basically the same as for the xamFormulaEditor. Listing 3 demonstrates how the FormulaEditorDialog can be configured.
The following table lists the code examples provided below.
The code below demonstrates how to add a xamCalculationManager control to an application and how to register a text box in it.
In XAML:
<UserControl x:Class="FormulaEditorSample.MainPage"
…
xmlns:ig="http://schemas.infragistics.com/xaml">
<Grid x:Name="LayoutRoot">
<ig:XamCalculationManager x:Name="CalculationManager"/>
<TextBox Margin="30" x:Name="FormulaString"
ig:XamCalculationManager.CalculationManager=
"{Binding ElementName=CalculationManager}"/>
</Grid>
</UserControl>
In Visual Basic:
Imports System.Windows.Controls
Imports Infragistics.Calculations
Class MainWindow
Public Sub New()
InitializeComponent()
Dim formulaString As New TextBox
Me.LayoutRoot.Children.Add(formulaString)
Dim CalculationManager As New XamCalculationManager
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager)
End Sub
End Class
In C#:
using System.Windows.Controls;
using Infragistics.Calculations;
namespace FormulaEditorSample
{
public partial class MainPage : UserControl
{
public MainPage()
{
InitializeComponent();
TextBox formulaString = new TextBox();
this.LayoutRoot.Children.Add(formulaString);
XamCalculationManager CalculationManager = new XamCalculationManager();
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager);
}
}
}
The code below demonstrates how to add a xamFormulaEditor control to your application and how to set its Target and Formula properties.
In XAML:
<UserControl x:Class="FormulaEditorSample.MainPage"
…
xmlns:ig="http://schemas.infragistics.com/xaml">
<Grid x:Name="LayoutRoot">
<StackPanel>
<ig:XamCalculationManager x:Name="CalculationManager"/>
<TextBox Margin="30" x:Name="FormulaString"
ig:XamCalculationManager.CalculationManager="{Binding ElementName=CalculationManager}"/>
<ig:XamFormulaEditor x:Name="formulaEditor" MinLineCount="3"
Target="{Binding ElementName=FormulaString}"/>
</StackPanel>
</Grid>
</UserControl>
In Visual Basic:
Imports System.Windows.Controls
Imports Infragistics.Calculations
Imports Infragistics.Controls.Interactions
Class MainWindow
Public Sub New()
InitializeComponent()
Dim stackPanel As New StackPanel
Me.LayoutRoot.Children.Add(stackPanel)
Dim formulaString As New TextBox
stackPanel.Children.Add(formulaString)
Dim CalculationManager As New XamCalculationManager
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager)
Dim formulaEditor As New XamFormulaEditor()
formulaEditor.Target = formulaString
formulaEditor.Formula = "ABS(-5)"
formulaEditor.MinLineCount = 3
stackPanel.Children.Add(formulaEditor)
End Sub
End Class
In C#:
using System.Windows.Controls;
using Infragistics.Calculations;
using Infragistics.Controls.Interactions;
namespace FormulaEditorSample
{
public partial class MainPage : UserControl
{
public MainPage()
{
InitializeComponent();
StackPanel stackPanel = new StackPanel();
this.LayoutRoot.Children.Add(stackPanel);
TextBox formulaString = new TextBox();
stackPanel.Children.Add(formulaString);
XamCalculationManager CalculationManager = new XamCalculationManager();
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager);
XamFormulaEditor formulaEditor = new XamFormulaEditor();
formulaEditor.Target = formulaString;
formulaEditor.Formula = "ABS(-5)";
stackPanel.Children.Add(formulaEditor);
}
}
}
The code below demonstrates how to add a FormulaEditorDialog control to your application and how to set its Target and Formula properties.
In XAML:
<UserControl x:Class="FormulaEditorSample.MainPage"
…
xmlns:ig="http://schemas.infragistics.com/xaml">
<Grid x:Name="LayoutRoot">
<StackPanel>
<ig:XamCalculationManager x:Name="CalculationManager"/>
<TextBox Margin="30" x:Name="FormulaString"
ig:XamCalculationManager.CalculationManager=
"{Binding ElementName=CalculationManager}"/>
<ig:FormulaEditorDialog x:Name="formulaEditorDialog"
Target="{Binding ElementName=FormulaString}"/>
<Button x:Name="commitButton" Click="commitButton_Click"/>
</StackPanel>
</Grid>
</UserControl>
In Visual Basic:
Imports System.Windows.Controls
Imports Infragistics.Calculations
Imports Infragistics.Controls.Interactions
Class MainWindow
Dim stackPanel As New StackPanel
Dim formulaString As New TextBox
Dim CalculationManager As New XamCalculationManager
Dim formulaEditorDialog As New FormulaEditorDialog()
Friend WithEvents commitButton As New Button
Public Sub New()
InitializeComponent()
Me.LayoutRoot.Children.Add(stackPanel)
stackPanel.Children.Add(formulaString)
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager)
formulaEditorDialog.Target = formulaString
formulaEditorDialog.Formula = "ABS(-5)"
StackPanel.Children.Add(formulaEditorDialog)
stackPanel.Children.Add(commitButton)
commitButton.Content = "Commit"
End Sub
Private Sub commitButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles commitButton.Click
Me.formulaEditorDialog.CommitEdit()
End Sub
End Class
In C#:
using System.Windows.Controls;
using Infragistics.Calculations;
using Infragistics.Controls.Interactions;
namespace FormulaEditorSample
{
public partial class MainPage : UserControl
{
StackPanel stackPanel = new StackPanel();
TextBox formulaString = new TextBox();
XamCalculationManager CalculationManager = new XamCalculationManager();
FormulaEditorDialog formulaEditorDialog = new FormulaEditorDialog();
Button commitButton = new Button();
public MainPage()
{
InitializeComponent();
this.LayoutRoot.Children.Add(stackPanel);
stackPanel.Children.Add(formulaString);
XamCalculationManager.SetCalculationManager(formulaString, CalculationManager);
formulaEditorDialog.Target = formulaString;
formulaEditorDialog.Formula = "ABS(-5)";
stackPanel.Children.Add(formulaEditorDialog);
commitButton.Content = "Commit";
stackPanel.Children.Add(commitButton);
commitButton.Click += new System.Windows.RoutedEventHandler(commitButton_Click);
}
void commitButton_Click(object sender, System.Windows.RoutedEventArgs e)
{
this.formulaEditorDialog.CommitEdit();
}
}
}
Following are some other topics you may find useful.