Ignite UI for Angular

All
  • Public
  • Public/Protected
  • All

Class IgxRadialGaugeComponent

A radial gauge for displaying a single value on a defined scale.

Hierarchy

Hierarchy

  • IgxRadialGaugeComponent

Implements

  • AfterContentInit
  • OnDestroy

Constructors

Properties

Accessors

Methods

Constructors

constructor

  • Parameters

    • _renderer: Renderer2
    • _elRef: ViewContainerRef
    • _ngZone: NgZone
    • _componentFactoryResolver: ComponentFactoryResolver
    • _injector: Injector

    Returns IgxRadialGaugeComponent

Properties

_dynamicContent

_dynamicContent: ViewContainerRef

actualRanges

actualRanges: IgxRadialGaugeRangeComponent[]

The ranges actually present in the chart. Do not directly modify this array. This array's contents can be modified by causing Angular to reproject the child content. Or adding and removing ranges from the manual ranges collection on the ranges property.

contentRanges

contentRanges: QueryList<IgxRadialGaugeRangeComponent>

Static ngAcceptInputType_actualMaximumValue

ngAcceptInputType_actualMaximumValue: string | number

Static ngAcceptInputType_actualMinimumValue

ngAcceptInputType_actualMinimumValue: string | number

Static ngAcceptInputType_actualPixelScalingRatio

ngAcceptInputType_actualPixelScalingRatio: string | number

Static ngAcceptInputType_animating

ngAcceptInputType_animating: string | boolean

Static ngAcceptInputType_backingCornerRadius

ngAcceptInputType_backingCornerRadius: string | number

Static ngAcceptInputType_backingInnerExtent

ngAcceptInputType_backingInnerExtent: string | number

Static ngAcceptInputType_backingOuterExtent

ngAcceptInputType_backingOuterExtent: string | number

Static ngAcceptInputType_backingOversweep

ngAcceptInputType_backingOversweep: string | number

Static ngAcceptInputType_backingShape

ngAcceptInputType_backingShape: string | RadialGaugeBackingShape

Static ngAcceptInputType_backingStrokeThickness

ngAcceptInputType_backingStrokeThickness: string | number

Static ngAcceptInputType_centerX

ngAcceptInputType_centerX: string | number

Static ngAcceptInputType_centerY

ngAcceptInputType_centerY: string | number

Static ngAcceptInputType_duplicateLabelOmissionStrategy

ngAcceptInputType_duplicateLabelOmissionStrategy: string | RadialGaugeDuplicateLabelOmissionStrategy

Static ngAcceptInputType_interval

ngAcceptInputType_interval: string | number

Static ngAcceptInputType_isNeedleDraggingConstrained

ngAcceptInputType_isNeedleDraggingConstrained: string | boolean

Static ngAcceptInputType_isNeedleDraggingEnabled

ngAcceptInputType_isNeedleDraggingEnabled: string | boolean

Static ngAcceptInputType_labelExtent

ngAcceptInputType_labelExtent: string | number

Static ngAcceptInputType_labelFormatSpecifiers

ngAcceptInputType_labelFormatSpecifiers: string | any[]

Static ngAcceptInputType_labelInterval

ngAcceptInputType_labelInterval: string | number

Static ngAcceptInputType_maximumValue

ngAcceptInputType_maximumValue: string | number

Static ngAcceptInputType_minimumValue

ngAcceptInputType_minimumValue: string | number

Static ngAcceptInputType_minorTickCount

ngAcceptInputType_minorTickCount: string | number

Static ngAcceptInputType_minorTickEndExtent

ngAcceptInputType_minorTickEndExtent: string | number

Static ngAcceptInputType_minorTickStartExtent

ngAcceptInputType_minorTickStartExtent: string | number

Static ngAcceptInputType_minorTickStrokeThickness

ngAcceptInputType_minorTickStrokeThickness: string | number

Static ngAcceptInputType_needleBaseFeatureExtent

ngAcceptInputType_needleBaseFeatureExtent: string | number

Static ngAcceptInputType_needleBaseFeatureWidthRatio

ngAcceptInputType_needleBaseFeatureWidthRatio: string | number

Static ngAcceptInputType_needleEndExtent

ngAcceptInputType_needleEndExtent: string | number

Static ngAcceptInputType_needleEndWidthRatio

ngAcceptInputType_needleEndWidthRatio: string | number

Static ngAcceptInputType_needlePivotInnerWidthRatio

ngAcceptInputType_needlePivotInnerWidthRatio: string | number

Static ngAcceptInputType_needlePivotShape

ngAcceptInputType_needlePivotShape: string | RadialGaugePivotShape

Static ngAcceptInputType_needlePivotStrokeThickness

ngAcceptInputType_needlePivotStrokeThickness: string | number

Static ngAcceptInputType_needlePivotWidthRatio

ngAcceptInputType_needlePivotWidthRatio: string | number

Static ngAcceptInputType_needlePointFeatureExtent

ngAcceptInputType_needlePointFeatureExtent: string | number

Static ngAcceptInputType_needlePointFeatureWidthRatio

ngAcceptInputType_needlePointFeatureWidthRatio: string | number

Static ngAcceptInputType_needleShape

ngAcceptInputType_needleShape: string | RadialGaugeNeedleShape

Static ngAcceptInputType_needleStartExtent

ngAcceptInputType_needleStartExtent: string | number

Static ngAcceptInputType_needleStartWidthRatio

ngAcceptInputType_needleStartWidthRatio: string | number

Static ngAcceptInputType_needleStrokeThickness

ngAcceptInputType_needleStrokeThickness: string | number

Static ngAcceptInputType_pixelScalingRatio

ngAcceptInputType_pixelScalingRatio: string | number

Static ngAcceptInputType_radiusMultiplier

ngAcceptInputType_radiusMultiplier: string | number

Static ngAcceptInputType_rangeBrushes

ngAcceptInputType_rangeBrushes: string | string[]

Static ngAcceptInputType_rangeOutlines

ngAcceptInputType_rangeOutlines: string | string[]

Static ngAcceptInputType_scaleEndAngle

ngAcceptInputType_scaleEndAngle: string | number

Static ngAcceptInputType_scaleEndExtent

ngAcceptInputType_scaleEndExtent: string | number

Static ngAcceptInputType_scaleOversweep

ngAcceptInputType_scaleOversweep: string | number

Static ngAcceptInputType_scaleOversweepShape

ngAcceptInputType_scaleOversweepShape: string | RadialGaugeScaleOversweepShape

Static ngAcceptInputType_scaleStartAngle

ngAcceptInputType_scaleStartAngle: string | number

Static ngAcceptInputType_scaleStartExtent

ngAcceptInputType_scaleStartExtent: string | number

Static ngAcceptInputType_scaleSweepDirection

ngAcceptInputType_scaleSweepDirection: string | SweepDirection

Static ngAcceptInputType_tickEndExtent

ngAcceptInputType_tickEndExtent: string | number

Static ngAcceptInputType_tickStartExtent

ngAcceptInputType_tickStartExtent: string | number

Static ngAcceptInputType_tickStrokeThickness

ngAcceptInputType_tickStrokeThickness: string | number

Static ngAcceptInputType_transitionDuration

ngAcceptInputType_transitionDuration: string | number

Static ngAcceptInputType_transitionProgress

ngAcceptInputType_transitionProgress: string | number

Static ngAcceptInputType_value

ngAcceptInputType_value: string | number

Static ɵcmp

ɵcmp: unknown

Static ɵfac

ɵfac: unknown

Accessors

actualMaximumValue

  • get actualMaximumValue(): number

  • Gets the resolved maximum value of the scale.

    Returns number

  • set actualMaximumValue(v: number): void

  • Parameters

    • v: number

    Returns void

actualMaximumValueChange

  • get actualMaximumValueChange(): EventEmitter<number>

  • Returns EventEmitter<number>

actualMinimumValue

  • get actualMinimumValue(): number

  • Gets the resolved minimum value of the scale.

    Returns number

  • set actualMinimumValue(v: number): void

  • Parameters

    • v: number

    Returns void

actualMinimumValueChange

  • get actualMinimumValueChange(): EventEmitter<number>

  • Returns EventEmitter<number>

actualPixelScalingRatio

  • get actualPixelScalingRatio(): number

  • Gets the actual pixel scaling ratio used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

    Returns number

  • set actualPixelScalingRatio(v: number): void

  • Parameters

    • v: number

    Returns void

alignLabel

  • get alignLabel(): EventEmitter<{
        args: IgxAlignRadialGaugeLabelEventArgs;
        sender: any;
    }>

  • Event which is raised when a label of the gauge is aligned along the scale. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label. Use ui.width to obtain the width of the label. Use ui.height to obtain the height of the label. Use ui.offsetX to obtain the X offset of the label on the gauge scale. Use ui.offsetY to obtain the Y offset of the label on the gauge scale.

    Returns EventEmitter<{
        args: IgxAlignRadialGaugeLabelEventArgs;
        sender: any;
    }>

animating

  • get animating(): boolean

  • Gets a value indicating whether the radial gauge is currently animating.

    Returns boolean

backingBrush

  • get backingBrush(): string

  • Gets or sets the brush to use to fill the backing of the gauge.

    Returns string

  • set backingBrush(v: string): void

  • Parameters

    • v: string

    Returns void

backingCornerRadius

  • get backingCornerRadius(): number

  • Gets or sets the corner rounding radius to use for the fitted scale backings.

    Returns number

  • set backingCornerRadius(v: number): void

  • Parameters

    • v: number

    Returns void

backingInnerExtent

  • get backingInnerExtent(): number

  • Gets or sets the inner extent of the gauge backing.

    Returns number

  • set backingInnerExtent(v: number): void

  • Parameters

    • v: number

    Returns void

backingOuterExtent

  • get backingOuterExtent(): number

  • Gets or sets the outer extent of the gauge backing.

    Returns number

  • set backingOuterExtent(v: number): void

  • Parameters

    • v: number

    Returns void

backingOutline

  • get backingOutline(): string

  • Gets or sets the brush to use for the outline of the backing.

    Returns string

  • set backingOutline(v: string): void

  • Parameters

    • v: string

    Returns void

backingOversweep

  • get backingOversweep(): number

  • Gets or sets the over sweep angle to apply to the backing if it is displaying fitted (in degrees). Must be greater or equal to 0.

    Returns number

  • set backingOversweep(v: number): void

  • Parameters

    • v: number

    Returns void

backingShape

backingStrokeThickness

  • get backingStrokeThickness(): number

  • Gets or sets the stroke thickness of the backing outline.

    Returns number

  • set backingStrokeThickness(v: number): void

  • Parameters

    • v: number

    Returns void

centerX

  • get centerX(): number

  • Gets or sets the x position of the center of the gauge with the value ranging from 0 to 1.

    Returns number

  • set centerX(v: number): void

  • Parameters

    • v: number

    Returns void

centerY

  • get centerY(): number

  • Gets or sets the y position of the center of the gauge with the value ranging from 0 to 1.

    Returns number

  • set centerY(v: number): void

  • Parameters

    • v: number

    Returns void

duplicateLabelOmissionStrategy

font

  • get font(): string

  • Gets or sets the font.

    Returns string

  • set font(v: string): void

  • Parameters

    • v: string

    Returns void

fontBrush

  • get fontBrush(): string

  • Gets or sets the brush to use for the label font.

    Returns string

  • set fontBrush(v: string): void

  • Parameters

    • v: string

    Returns void

formatLabel

  • get formatLabel(): EventEmitter<{
        args: IgxFormatRadialGaugeLabelEventArgs;
        sender: any;
    }>

  • Event which is raised when a label of the gauge is formatted. Function takes first argument null and second argument ui. Use ui.owner to obtain reference to gauge widget. Use ui.actualMinimumValue to obtain the minimum value of gauge scale. Use ui.actualMaximumValue to obtain the maximum value of gauge scale. Use ui.startAngle to obtain the starting angle of gauge scale. Use ui.endAngle to obtain the ending angle of gauge scale. Use ui.angle to obtain the angle on the gauge scale at which the label will be located. Use ui.value to obtain the value on the gauge scale associated with the label. Use ui.label to obtain the string value of the label.

    Returns EventEmitter<{
        args: IgxFormatRadialGaugeLabelEventArgs;
        sender: any;
    }>

height

  • get height(): string

  • Returns string

  • set height(value: string): void

  • Parameters

    • value: string

    Returns void

interval

  • get interval(): number

  • Gets or sets the interval to use for the scale.

    Returns number

  • set interval(v: number): void

  • Parameters

    • v: number

    Returns void

isNeedleDraggingConstrained

  • get isNeedleDraggingConstrained(): boolean

  • Gets or sets whether the needle is constrained within the minimum and maximum value range during dragging.

    Returns boolean

  • set isNeedleDraggingConstrained(v: boolean): void

  • Parameters

    • v: boolean

    Returns void

isNeedleDraggingEnabled

  • get isNeedleDraggingEnabled(): boolean

  • Gets or sets whether needle dragging is enabled or not.

    Returns boolean

  • set isNeedleDraggingEnabled(v: boolean): void

  • Parameters

    • v: boolean

    Returns void

labelExtent

  • get labelExtent(): number

  • Gets or sets the position at which to put the labels as a value from 0 to 1, measured form the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set labelExtent(v: number): void

  • Parameters

    • v: number

    Returns void

labelFormat

  • get labelFormat(): string

  • Gets or sets the label composite format used when creating label values.

    Returns string

  • set labelFormat(v: string): void

  • Parameters

    • v: string

    Returns void

labelFormatSpecifiers

  • get labelFormatSpecifiers(): any[]

  • Gets or sets the format specifiers to use with the LabelFormat string.

    Returns any[]

  • set labelFormatSpecifiers(v: any[]): void

  • Parameters

    • v: any[]

    Returns void

labelInterval

  • get labelInterval(): number

  • Gets or sets the interval to use for rendering labels. This defaults to be the same interval as the tickmarks on the scale.

    Returns number

  • set labelInterval(v: number): void

  • Parameters

    • v: number

    Returns void

maximumValue

  • get maximumValue(): number

  • Gets or sets the maximum value of the scale.

    Returns number

  • set maximumValue(v: number): void

  • Parameters

    • v: number

    Returns void

minimumValue

  • get minimumValue(): number

  • Gets or sets the minimum value of the scale.

    Returns number

  • set minimumValue(v: number): void

  • Parameters

    • v: number

    Returns void

minorTickBrush

  • get minorTickBrush(): string

  • Gets or sets the brush to use for the minor tickmarks.

    Returns string

  • set minorTickBrush(v: string): void

  • Parameters

    • v: string

    Returns void

minorTickCount

  • get minorTickCount(): number

  • Gets or sets the number of minor tickmarks to place between major tickmarks.

    Returns number

  • set minorTickCount(v: number): void

  • Parameters

    • v: number

    Returns void

minorTickEndExtent

  • get minorTickEndExtent(): number

  • Gets or sets the position at which to stop rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set minorTickEndExtent(v: number): void

  • Parameters

    • v: number

    Returns void

minorTickStartExtent

  • get minorTickStartExtent(): number

  • Gets or sets the position at which to start rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set minorTickStartExtent(v: number): void

  • Parameters

    • v: number

    Returns void

minorTickStrokeThickness

  • get minorTickStrokeThickness(): number

  • Gets or sets the stroke thickness to use when rendering minor ticks.

    Returns number

  • set minorTickStrokeThickness(v: number): void

  • Parameters

    • v: number

    Returns void

needleBaseFeatureExtent

  • get needleBaseFeatureExtent(): number

  • Gets or sets the extent of the feature which is closest to the base (e.g. a bulb) with a value from -1 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleBaseFeatureExtent(v: number): void

  • Parameters

    • v: number

    Returns void

needleBaseFeatureWidthRatio

  • get needleBaseFeatureWidthRatio(): number

  • Gets or sets the width of the needle at its feature which is closest to the base (e.g. a bulb) with a value from 0 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleBaseFeatureWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needleBrush

  • get needleBrush(): string

  • Gets or sets the brush to use when rendering the fill of the needle.

    Returns string

  • set needleBrush(v: string): void

  • Parameters

    • v: string

    Returns void

needleEndExtent

  • get needleEndExtent(): number

  • Gets or sets the extent (from -1 to 1) at which to end rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleEndExtent(v: number): void

  • Parameters

    • v: number

    Returns void

needleEndWidthRatio

  • get needleEndWidthRatio(): number

  • Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleEndWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needleOutline

  • get needleOutline(): string

  • Gets or sets the brush to use when rendering the outline of the needle.

    Returns string

  • set needleOutline(v: string): void

  • Parameters

    • v: string

    Returns void

needlePivotBrush

  • get needlePivotBrush(): string

  • Gets or sets the brush to use for filling the needle cap. Note: this only applies to certain cap shapes.

    Returns string

  • set needlePivotBrush(v: string): void

  • Parameters

    • v: string

    Returns void

needlePivotInnerWidthRatio

  • get needlePivotInnerWidthRatio(): number

  • Gets or sets the width of the inner cutout section of the needle cap with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle that has a cutout section.

    Returns number

  • set needlePivotInnerWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needlePivotOutline

  • get needlePivotOutline(): string

  • Gets or sets the brush to use for the outlines of the needle cap.

    Returns string

  • set needlePivotOutline(v: string): void

  • Parameters

    • v: string

    Returns void

needlePivotShape

needlePivotStrokeThickness

  • get needlePivotStrokeThickness(): number

  • Gets or sets the stroke thickness to use for the outline of the needle cap.

    Returns number

  • set needlePivotStrokeThickness(v: number): void

  • Parameters

    • v: number

    Returns void

needlePivotWidthRatio

  • get needlePivotWidthRatio(): number

  • Gets or sets the width of the cap of the needle with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needlePivotWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needlePointFeatureExtent

  • get needlePointFeatureExtent(): number

  • Gets or sets the extent of the feature which is closest to the point (e.g. the tapering point of a needle) with a value from -1 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needlePointFeatureExtent(v: number): void

  • Parameters

    • v: number

    Returns void

needlePointFeatureWidthRatio

  • get needlePointFeatureWidthRatio(): number

  • Gets or sets the width of the needle at its feature which is closest to the point (e.g. the tapering point of a needle) with a value from 0 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needlePointFeatureWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needleShape

needleStartExtent

  • get needleStartExtent(): number

  • Gets or sets the extent (from -1 to 1) at which to start rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleStartExtent(v: number): void

  • Parameters

    • v: number

    Returns void

needleStartWidthRatio

  • get needleStartWidthRatio(): number

  • Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set needleStartWidthRatio(v: number): void

  • Parameters

    • v: number

    Returns void

needleStrokeThickness

  • get needleStrokeThickness(): number

  • Gets or sets the stroke thickness of the needle outline.

    Returns number

  • set needleStrokeThickness(v: number): void

  • Parameters

    • v: number

    Returns void

pixelScalingRatio

  • get pixelScalingRatio(): number

  • Gets or sets the scaling value used to affect the pixel density of the control. A higher scaling ratio will produce crisper visuals at the expense of memory. Lower values will cause the control to appear blurry.

    Returns number

  • set pixelScalingRatio(v: number): void

  • Parameters

    • v: number

    Returns void

radiusMultiplier

  • get radiusMultiplier(): number

  • Gets or sets the multiplying factor to apply to the normal radius of the gauge. The radius of the gauge is defined by the minimum of the width and height of the control divided by 2.0. This introduces a multiplicative factor to that value.

    Returns number

  • set radiusMultiplier(v: number): void

  • Parameters

    • v: number

    Returns void

rangeBrushes

  • get rangeBrushes(): string[]

  • Gets or sets a collection of brushes to be used as the palette for gauge ranges.

    Returns string[]

  • set rangeBrushes(v: string[]): void

  • Parameters

    • v: string[]

    Returns void

rangeOutlines

  • get rangeOutlines(): string[]

  • Gets or sets a collection of brushes to be used as the palette for gauge outlines.

    Returns string[]

  • set rangeOutlines(v: string[]): void

  • Parameters

    • v: string[]

    Returns void

ranges

scaleBrush

  • get scaleBrush(): string

  • Gets or sets the brush to use to fill the background of the scale.

    Returns string

  • set scaleBrush(v: string): void

  • Parameters

    • v: string

    Returns void

scaleEndAngle

  • get scaleEndAngle(): number

  • Gets or sets the end angle for the scale in degrees.

    Returns number

  • set scaleEndAngle(v: number): void

  • Parameters

    • v: number

    Returns void

scaleEndExtent

  • get scaleEndExtent(): number

  • Gets or sets the position at which to stop rendering the scale as a value from 0 to 1 measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set scaleEndExtent(v: number): void

  • Parameters

    • v: number

    Returns void

scaleOversweep

  • get scaleOversweep(): number

  • Gets or sets the extra degrees of sweep to apply to the scale background. Must be greater or equal to 0.

    Returns number

  • set scaleOversweep(v: number): void

  • Parameters

    • v: number

    Returns void

scaleOversweepShape

scaleStartAngle

  • get scaleStartAngle(): number

  • Gets or sets the start angle for the scale in degrees.

    Returns number

  • set scaleStartAngle(v: number): void

  • Parameters

    • v: number

    Returns void

scaleStartExtent

  • get scaleStartExtent(): number

  • Gets or sets the position at which to start rendering the scale, measured from the center of the gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set scaleStartExtent(v: number): void

  • Parameters

    • v: number

    Returns void

scaleSweepDirection

  • get scaleSweepDirection(): SweepDirection

  • Gets or sets the direction in which the scale sweeps around the center from the start angle to end angle.

    Returns SweepDirection

  • set scaleSweepDirection(v: SweepDirection): void

  • Parameters

    Returns void

tickBrush

  • get tickBrush(): string

  • Gets or sets the brush to use for the major tickmarks.

    Returns string

  • set tickBrush(v: string): void

  • Parameters

    • v: string

    Returns void

tickEndExtent

  • get tickEndExtent(): number

  • Gets or sets the position at which to stop rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set tickEndExtent(v: number): void

  • Parameters

    • v: number

    Returns void

tickStartExtent

  • get tickStartExtent(): number

  • Gets or sets the position at which to start rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.

    Returns number

  • set tickStartExtent(v: number): void

  • Parameters

    • v: number

    Returns void

tickStrokeThickness

  • get tickStrokeThickness(): number

  • Gets or sets the stroke thickness to use when rendering ticks.

    Returns number

  • set tickStrokeThickness(v: number): void

  • Parameters

    • v: number

    Returns void

transitionDuration

  • get transitionDuration(): number

  • Gets or sets the number of milliseconds over which changes to the gauge should be animated.

    Returns number

  • set transitionDuration(v: number): void

  • Parameters

    • v: number

    Returns void

transitionEasingFunction

  • get transitionEasingFunction(): ((time: number) => number)

  • Gets or sets the easing function used to morph the current series.

    Returns ((time: number) => number)

      • (time: number): number

      • Gets or sets the easing function used to morph the current series.

        Parameters

        • time: number

        Returns number

  • set transitionEasingFunction(v: ((time: number) => number)): void

  • Parameters

    • v: ((time: number) => number)
        • (time: number): number

        • Parameters

          • time: number

          Returns number

    Returns void

transitionProgress

  • get transitionProgress(): number

  • Gets the transition progress of the animation when the control is animating.

    Returns number

  • set transitionProgress(v: number): void

  • Parameters

    • v: number

    Returns void

value

  • get value(): number

  • Gets or sets the value at which to point the needle of the gauge.

    Returns number

  • set value(v: number): void

  • Parameters

    • v: number

    Returns void

valueChanged

  • get valueChanged(): EventEmitter<{
        args: IgxDoubleValueChangedEventArgs;
        sender: any;
    }>

  • Occurs when the Value property changes.

    Returns EventEmitter<{
        args: IgxDoubleValueChangedEventArgs;
        sender: any;
    }>

width

  • get width(): string

  • Returns string

  • set width(value: string): void

  • Parameters

    • value: string

    Returns void

Methods

containerResized

  • Returns void

exportSerializedVisualData

  • Returns visuals as a serialized string.

    Returns string

findByName

  • Parameters

    • name: string

    Returns any

flush

  • Use to force the radial gauge to finish any deferred work before printing or evaluating its visual. This should only be called if the visual of the radial gauge needs to be synchronously saved or evaluated. Calling this method too often will hinder the performance of the radial gauge.

    Returns void

getPointForValue

  • Parameters

    • value: number
    • extent: number

    Returns IgPoint

getValueForPoint

  • Gets the value for the main scale of the gauge for a given point within the bounds of the gauge.

    Parameters

    • point: IgPoint
      • The point for which to retrieve the associated value.

    Returns number

needleContainsPoint

  • Parameters

    Returns boolean

ngAfterContentInit

  • Returns void

ngOnDestroy

  • Returns void

provideContainer

  • Called by the UI framework to provide a UI container for rendering this control.

    Parameters

    • container: any
      • The UI container element.

    Returns void

scaleValue

  • Scales a value on the gauge's main scale to an angle around the center point of the gauge, in radians.

    Parameters

    • value: number
      • The value to scale.

    Returns number

styleUpdated

  • Returns void

unscaleValue

  • Unscales a value from an angle in radians to the represented value along the main scale of the gauge.

    Parameters

    • angle: number
      • The angle in radians to unscale to a value.

    Returns number

Static _createFromInternal