Static $tStatic nextStatic noStatic compareStatic compareStatic createCreates a linear gradient that can be applied to a cell's fill.
ArgumentException 'stops' contains less than two gradient stops. There must be at least two stops to define the gradient.
The angle, in degrees, of the direction of the linear gradient, going clockwise from the left-to-right direction.
Two or more gradient stops which describe the color transitions and their positions within the gradient.
Creates a linear gradient that can be applied to a cell's fill.
ArgumentException 'colorInfo1' or 'colorInfo2' is an automatic or a system color.
The angle, in degrees, of the direction of the linear gradient, going clockwise from the left-to-right direction.
A WorkbookColorInfo which describes the color at the start of the gradient.
A WorkbookColorInfo which describes the color at the end of the gradient.
Creates a linear gradient that can be applied to a cell's fill.
ArgumentException 'color1' or 'color2' are the empty or system colors or have a non-opaque alpha channel.
The angle, in degrees, of the direction of the linear gradient, going clockwise from the left-to-right direction.
The color at the start of the gradient.
The color at the end of the gradient.
Static createCreates a solid color or pattern fill that can be applied to a cell.
'backgroundColorInfo' and 'patternColorInfo' can be specified as null to use the default colors.
InvalidEnumArgumentException 'patternStyle' is Default or not defined in the FillPatternStyle enumeration.
A WorkbookColorInfo which describes the background color of the cell, which will only be seen if the 'patternStyle' is not None.
A WorkbookColorInfo which describes the pattern color of the cell, which will only be seen if the 'patternStyle' is not None or Solid.
The fill pattern for the cell.
Creates a solid color or pattern fill that can be applied to a cell.
ArgumentException 'backgroundColor' or 'patternColor' are the empty color or have a non-opaque alpha channel.
InvalidEnumArgumentException 'patternStyle' is Default or not defined in the FillPatternStyle enumeration.
The background color of the cell, which will only be seen if the 'patternStyle' is not None.
The pattern color of the cell, which will only be seen if the 'patternStyle' is not None or Solid.
The fill pattern for the cell.
Static createCreates a rectangular gradient that can be applied to a cell's fill.
ArgumentException 'colorInfo1' or 'colorInfo2' is an automatic or a system color.
A WorkbookColorInfo which describes the color at the inner rectangle (cell center) of the gradient.
A WorkbookColorInfo which describes the color at the outer rectangle (cell edges) of the gradient.
Creates a rectangular gradient that can be applied to a cell's fill.
The rectangular gradient is defined by specifying an inner rectangle and a set of gradient stops. The gradient goes from the edges of the inner rectangle to the edges of the cell. If the inner rectangle does not have a height or width of 0, the color of the first gradient stop will be filled in the center of the inner rectangle.
The inner rectangle is defined by the 'left', 'top', 'right', and 'bottom' parameters. They are relative values ranging from 0.0 to 1.0 and they go from the top/left to the bottom/right. So, for example, to specify a gradient that goes out from the center, all values would be 0.5. Or to specify a gradient which goes out from the bottom-left corner of the cell, the following values would be used: left = 0.0, top = 1.0, right = 0.0, bottom = 1.0.
ArgumentOutOfRangeException 'left', 'top', 'right', or 'bottom' are less than 0.0 or greater than 1.0.
ArgumentException 'stops' contains less than two gradient stops. There must be at least two stops to define the gradient.
The left edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The top edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
The right edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The bottom edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
Two or more gradient stops which describe the color transitions and their positions within the gradient.
Creates a rectangular gradient that can be applied to a cell's fill.
The rectangular gradient is defined by specifying an inner rectangle and a set of gradient stops. The gradient goes from the edges of the inner rectangle to the edges of the cell. If the inner rectangle does not have a height or width of 0, the color of the first gradient stop will be filled in the center of the inner rectangle.
The inner rectangle is defined by the 'left', 'top', 'right', and 'bottom' parameters. They are relative values ranging from 0.0 to 1.0 and they go from the top/left to the bottom/right. So, for example, to specify a gradient that goes out from the center, all values would be 0.5. Or to specify a gradient which goes out from the bottom-left corner of the cell, the following values would be used: left = 0.0, top = 1.0, right = 0.0, bottom = 1.0.
ArgumentException 'colorInfo1' or 'colorInfo2' is an automatic or a system color.
ArgumentOutOfRangeException 'left', 'top', 'right', or 'bottom' are less than 0.0 or greater than 1.0.
The left edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The top edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
The right edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The bottom edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
A WorkbookColorInfo which describes the color at the inner rectangle of the gradient.
A WorkbookColorInfo which describes the color at the outer rectangle (cell edges) of the gradient.
Creates a rectangular gradient that can be applied to a cell's fill.
The rectangular gradient is defined by specifying an inner rectangle and a set of gradient stops. The gradient goes from the edges of the inner rectangle to the edges of the cell. If the inner rectangle does not have a height or width of 0, the color of the first gradient stop will be filled in the center of the inner rectangle.
The inner rectangle is defined by the 'left', 'top', 'right', and 'bottom' parameters. They are relative values ranging from 0.0 to 1.0 and they go from the top/left to the bottom/right. So, for example, to specify a gradient that goes out from the center, all values would be 0.5. Or to specify a gradient which goes out from the bottom-left corner of the cell, the following values would be used: left = 0.0, top = 1.0, right = 0.0, bottom = 1.0.
ArgumentOutOfRangeException 'left', 'top', 'right', or 'bottom' are less than 0.0 or greater than 1.0.
ArgumentException 'color1' or 'color2' are empty or system colors or have a non-opaque alpha channel.
The left edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The top edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
The right edge of the inner rectangle of the gradient, ranging from 0.0 (the left of the cell) to 1.0 (the right of the cell).
The bottom edge of the inner rectangle of the gradient, ranging from 0.0 (the top of the cell) to 1.0 (the bottom of the cell).
The color at the inner rectangle of the gradient.
The color at the outer rectangle (cell edges) of the gradient.
Creates a rectangular gradient that can be applied to a cell's fill.
ArgumentException 'color1' or 'color2' are empty or system colors or have a non-opaque alpha channel.
The color at the inner rectangle (cell center) of the gradient.
The color at the outer rectangle (cell edges) of the gradient.
Static createA WorkbookColorInfo which describes the solid color of the fill.
Creates a solid color fill that can be applied to a cell.
ArgumentException 'solidColor' is the empty color or has a non-opaque alpha channel.
The solid color of the fill.
Static equalsStatic equalsStatic getStatic getStatic getStatic reference
Abstract base class for the fill of a cell.
See